Schools resource site

Engineering - Industry

Schools resources are only available to registered users. Please Login to access this area.

Login
Engineering - Industry
 | Level 
0009 - Basic Tools
Unit standard
0009 Edition 7
Engineering - Industry
 | Level 
0018 - Measurement 4433 & 4435
Unit standard
Measurement 0018 Edition 4
Engineering - Industry
 | Level 
1
22923 - Demonstrate basic engineering workshop skills under close supervision
Unit standard
22923 Version 3 Edition 1
Engineering - Industry
 | Level 
1
22924- Develop a simple product using engineering materials
Unit standard
22924 Version 3 Edition 1
Engineering - Industry
 | Level 
1
22926 - Demonstrate knowledge of safety procedures in a specific engineering workshop
Unit standard
22926 Version 3 Edition 1
Engineering - Industry
 | Level 
1
4433 - Select, use, and care for simple measuring devices used in engineering
Unit standard
4433 Version 7 Edition 3
Engineering - Industry
 | Level 
2
11661- Perform engineering drilling operations using a pedestal type drilling machine
Unit standard
11661 Version 5 Edition 4
Engineering - Industry
 | Level 
2
21907 - Demonstrate and apply knowledge of safe welding procedures under supervision
Unit standard
21907 Version 3 Edition 3
Engineering - Industry
 | Level 
2
21911 - Demonstrate knowledge of safety on engineering worksites
Unit standard
21911 Version 3 Edition
Engineering - Industry
 | Level 
2
2387 - Assemble mechanical components under supervision
Unit standard
2387 Version 7 Edition 2
Engineering - Industry
 | Level 
2
2395 - Demonstrate and apply knowledge of the selection, use, and care of engineering hand tools
Unit standard
2395 Version 9 Edition 7
Engineering - Industry
 | Level 
2
2396 - Demonstrate and apply knowledge of the selection, use, and care of portable hand held engineering power tools
Unit standard
2396 Version 7 Edition 6
Engineering - Industry
 | Level 
2
2414 - Lay out and mark off regular fabrication shapes under supervision
Unit standard
2414 Version 7 Edition 1
Engineering - Industry
 | Level 
2
2416 - Assemble and mechanically join plate and sheet under supervision
Unit standard
2416 Version 7 Edition 1
Engineering - Industry
 | Level 
2
2417 - Mechanically cut fabrication materials under supervision
Unit standard
2417 Version 7 Edition 1
Engineering - Industry
 | Level 
2
2431 - Manually produce and interpret simple engineering component drawings under supervision
Unit standard
2431 Version 8 Edition 1
Engineering - Industry
 | Level 
2
2433 - Produce engineering component drawings using CAD software
Unit standard
2433 Version 8 Edition 5
Engineering - Industry
 | Level 
2
29397 - Demonstrate knowledge of basic trade calculations and units of measure for mechanical engineering trades
Unit standard
29397 Version 1 Edition 8
Engineering - Industry
 | Level 
2
29398 - Apply knowledge of basic trade calculations for mechanical engineering trades
Unit standard
29398 Version 1 Edition 5
Engineering - Industry
 | Level 
2
29549 - Demonstrate basic knowledge of the mechanical properties and selection of engineering materials
Unit standard
29549 Version 2 Edition 4
Engineering - Industry
 | Level 
2
29550 - Demonstrate basic knowledge of common engineering metals
Unit standard
29550 Version 2 Edition 7
Engineering - Industry
 | Level 
2
29654 - Demonstrate knowledge of and interpret mechanical engineering drawings and geometric tolerancing
Unit standard
29654 Version 1 Edition 5
Engineering - Industry
 | Level 
2
29655 - Manually produce engineering drawings
Unit standard
29655 Version 2 Edition 7
Engineering - Industry
 | Level 
2
29670 - Demonstrate knowledge of fabrication machinery, materials, and processes
Unit standard
29670 Version 1 Edition 7
Engineering - Industry
 | Level 
2
29671- Demonstrate knowledge of machining equipment, tools and principles
Unit standard
29671 Version 1 Edition 10
Engineering - Industry
 | Level 
2
29674- Demonstrate knowledge of mechanical fasteners used in mechanical engineering
Unit standard
29674 Version 1 Edition 11
Engineering - Industry
 | Level 
3
19873 - Demonstrate knowledge of bearings used in machines and equipment
Unit standard
19873 Version 4 Edition 3
Engineering - Industry
 | Level 
3
20802 - Produce detailed two-dimensional engineering drawings using CAD software under supervision
Unit standard
20802 Version 4 Edition 2
Engineering - Industry
 | Level 
3
2436 - Create three-dimensional engineering models using CAD software under supervision
Unit standard
2436 Version 8 Edition 2
Engineering - Industry
 | Level 
3
4438- Demonstrate knowledge of fits, limits and tolerances in engineering
Unit standard
4438 Version 7 Edition 3

Pricing for assessment materials 2025

Pricing is based on the number of students reported back to NZQA per unit standard, not the number of downloads. A yearly invoice will be sent to the school in the following year.


Assessment Guide + Model Answers:

20+ learners → $150

Fewer than 20 learners → $75

Important information:

  • Prices do not include GST.
  • Access is valid for one calendar year per unit standard, with annual checks.
  • Printed workbooks, shipping, and handling are at extra costs.

Unit standard resources